Author Topic: WANTED TO BUY ~ BEARING FOR A HUB LAMP  (Read 727 times)

LORNE-SHIELDS

  • Newbie
  • *
  • Posts: 19
    • View Profile
WANTED TO BUY ~ BEARING FOR A HUB LAMP
« on: October 30, 2019, 06:26:23 AM »
WANTED:  HUB LAMP BEARING

Hope someone can assist.

The photos attached are of a similar type bearing but it is too thick.   I need a bearing that is wider across. The example I have illustrated is 1-3/4" and is too narrow to fit.  Please advise if you have a bearing that is 1-5/8" or wider  that is available.

Best fall wishes to one and all.

Kindly email directly if possible.   

LORNE SHIELDS .... lorne-shields@rogers.com
« Last Edit: October 31, 2019, 07:02:30 AM by LORNE-SHIELDS »

mike cates

  • Full Member
  • ***
  • Posts: 164
    • View Profile
Re: WANTED TO BUY ~ BEARING FOR A HUB LAMP
« Reply #1 on: March 06, 2020, 11:52:32 PM »
Lorne,
I have just found a original hub lamp bearing but cannot understand your description that if a 1 3/4" width like your photo example shown is too narrow to fit, why would a 1 5/8" or wider (which is narrower yet and a wider one could include a 1 3/4" width like your example) work for you?
Mike Cates, CA.
« Last Edit: March 06, 2020, 11:55:27 PM by mike cates »