TheWheelmen

Buy / Sell => Board for buying and selling Wheelmen goods and services. => Topic started by: LORNE-SHIELDS on October 30, 2019, 06:26:23 AM

Title: WANTED TO BUY ~ BEARING FOR A HUB LAMP
Post by: LORNE-SHIELDS on October 30, 2019, 06:26:23 AM

WANTED:  HUB LAMP BEARING

Hope someone can assist.

The photos attached are of a similar type bearing but it is too thick.   I need a bearing that is wider across. The example I have illustrated is 1-3/4" and is too narrow to fit.  Please advise if you have a bearing that is 1-5/8" or wider  that is available.

Best fall wishes to one and all.

Kindly email directly if possible.   

LORNE SHIELDS .... lorne-shields@rogers.com

Title: Re: WANTED TO BUY ~ BEARING FOR A HUB LAMP
Post by: mike cates on March 06, 2020, 11:52:32 PM

Lorne,
I have just found a original hub lamp bearing but cannot understand your description that if a 1 3/4" width like your photo example shown is too narrow to fit, why would a 1 5/8" or wider (which is narrower yet and a wider one could include a 1 3/4" width like your example) work for you?
Mike Cates, CA.