Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Kurt S.

Pages: [1] 2
1
http://goldenoldy.org/wire.htm

SEE LINK ABOVE FOR SPOKE SPECIFICATIONS

I'm not sure who wrote this paper on high wheel bicycle spokes, but it might contain some of what you are looking for.

(I was actually searching through my files for an article I misplaced, when I came across this file I forgot I had) LOL

2
General discussions on Wheelmen topics. / Re: wire specs for making spokes
« on: September 13, 2019, 11:31:28 PM »
https://archive.org/stream/wheelc20201897111898newy#page/n39/mode/2up

This article covers a couple of ideas when it comes to spoke tensions, although the tests there-of conducted on wood rim bicycles, the physics should be applicable to a high wheel bicycle. 

This might not answer the subject of spoke tensions in a direct sense for a high wheel, however I found that the study was enlightening and a worthwhile read.  I hope you enjoy it as well. 

Best regards, Kurt

3
Wanting to purchase, if possible, a calendar from 1897 titled "The World of Cycling".

The artwork is by Eugene Grivaz.

The publisher is Frederick A. Stokes Company.

This is an approximated 9 x 11" , 12 page lithograph calendar with one month per subsequent locations of the images drawn of bicyclists in different countries.

The attached is what the images of the calendar would look much similar to.


P.S. If you happen to know of an example for only viewing, possibly a museum or private collection , please let me know of it's existence.  If one is available to purchase, than please respond here or email me @ kurtschaak@yahoo.com 

Again my sincere thanks, Kurt



4
General discussions on Wheelmen topics. / Re: Sager Gear Co. (research)
« on: August 28, 2019, 09:53:42 PM »
Here is a timeline that I am putting together noting some of the Sager Gear Co.  and associated companies that have been the focus of this search.  If you can add anything to this effort please do!  I have yet to find a brochure of theirs, anything might help a great deal.

 (NOTE: the IVEL mentioned in this timeline is that of G.W. Shroyer, Dayton OH & not related to an English make named the same)

  {Edited 8-31-19, includes an updated timeline}

5
General discussions on Wheelmen topics. / Sager Gear Co. (research)
« on: August 28, 2019, 04:10:55 PM »
I've been attempting to get a grasp of the Sager Gear Company associated bicycles, products, history etc. 

I see they had some history going back to the late 1890's & up until the end of 1903.  However the proverbial honeypot of information has yet eluded me & the information I have found seems far too fragmented to get an understanding of the companies business undertakings.

Just hoping someone has pedaled down this path before me & can give me some insights. 

Again my most  sincere gratitude, Kurt 


6
Hello Mike,

  Good to hear from you, that looks to be a fine bicycle. 

  I've been wondering the same, if they indeed had theirs painted on in their early years.  I did find from an 1897 catalog they had them removable, so the buyers could swap them out at their discretion.  It's seems odd not to see an outline of a badge on the bicycle images in the Meacham catalogs of 1892 & 93.

  The bicycle I have been working on has given me quite the ride since I bought it.  I thought it was a Kenyon/Pacemaker, and so did Mr. Metz, because of the headbadge that is on it.  The style is similar but the details just don't support the bicycle as a Pacemaker.  In as much I was lucky enough to see a catalog by E.C. Meacham go up for sale and noted some rather unique details for the 1892 Dunlop Safety, and the changes leading up to the date of the publication seem consistent with it as well. 

  Mike, I'm still enjoying my Victor highwheel I acquired from you, we've put on countless miles together and is still an absolute pleasure to ride.  I might take it on another century ride in July at the national meet.

  Very best regards & again my sincere thanks,  Kurt

     

       

   

7
Needing a headbadge for an 1892 Bicycle made by E.C. Meacham Arms, Saint Louis MO

Also seeking images or known examples of bicycles made by this company about these years.   

I have not seen a headbadge yet for this company's bicycle and would even welcome an image of one just to understand what they look like.  i have found a trademark of their which might be the bases of their headbadges, but without seeing one, I am just not sure.

Your help is greatly appreciated as always, thanks.  Kurt

8
the image attached is for a chain adjuster that was manufactured in 1893 for an 1894 catalog of a USA mfg. What I am hoping to learn is when this style of chain adjuster first came into use. (imported or foreign parts included)

9
Looking in reference to a Pacemaker Bicycle 1893 that was mentioned in Wheelmens Publication #51
 (note I do not have a full copy yet, have tried to order one, but the process seems a bit slow)

This post has been re-posted due to new information found about this bicycle.  It does not appear at all consistent with my findings of the Pacemaker Bicycle Company or the Kenyon Bicycle Company. 

Does anyone know of this bicycle, or are there any records of the bicycle while David Metz had it?

Who could I contact that may have notes or record of it?   

Thanks, Kurt

10
Searching for any copies of brochures from the Kenyon Bi. Mfg Co. or the Pacemaker Bi. Co. of Des Moines Iowa.

Note; nothing currently in the Wheelmens library. 

Found the Cover to the 1893 Kenyon Bi. Mfg Co. , however it's only the cover.

11
I found that the founder Mr. Kenyon, was from Wisconsin and after marrying moved to Des Moines Iowa  & established himself as a bicycle manufacturer.  Of what I understand he was the first bicycle manufacturer in Iowa. 

12
Thank you, I was not sure what was in the publication & that is very welcome to see.

My most sincere thanks and gratitude, Kurt


13
Looking in reference to a Pacemaker Bicycle 1893 that was mentioned in Wheelmens Publication #51
 (note I do not have a full copy yet, have tried to order one, but the process seems a bit slow)

This post has been re-posted due to new information found about this bicycle.  It does not appear at all consistent with my findings of the Pacemaker Bicycle Company or the Kenyon Bicycle Company. 

Does anyone know of this bicycle, or are there any records of the bicycle while David Metz had it?

Who could I contact that may have notes or record of it?   

Thanks, Kurt

14
  The Maryland Bicycle Club photograph was taken between 1885 and 1889. 

  One of the fun discoveries I had with this photo was when looking the blurry image of the pennant and mirroring the image  & rotating it sideways where most of the name Maryland could be read.   

 

15
Thank you Paul, that is a nice print of their clubhouse. 

I have been enjoying reading the history of this area and the club.  Baltimore is really rich with history, I just read an article about "The Star Spangled Banner" being written there.

Anyway, I had found a couple of things about the clubhouses that the Maryland Bicycle Club had.  Their first gathering place, which seems to be from the article a grand place, was at 10 North Avenue.  The clubhouse which you kindly posted, was inaugurated as  such in 1885, although I'm intrigued by whom your print has listed as Architect and Builder, my clippings have shown someone different, I will assume yours being the latter printing of 1894 has it correct.

Thank you again.   

Pages: [1] 2