Author Topic: WTB = Pedal for Safety Bicycle "wanted"  (Read 15039 times)

Kurt S.

  • Newbie
  • *
  • Posts: 24
    • View Profile
WTB = Pedal for Safety Bicycle "wanted"
« on: June 30, 2018, 06:41:10 PM »
Wanted, a Bicycle pedal for a safety bicycle circa 1892.

Still looking for one of these pedals for the Lozier & Yost.
« Last Edit: December 30, 2018, 09:09:14 AM by Kurt S. »

paulbidder

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: Pedal for Safety Bicycle "wanted"
« Reply #1 on: August 01, 2018, 07:12:07 PM »
Can you please quote the thread size..Paul Adams

Kurt S.

  • Newbie
  • *
  • Posts: 24
    • View Profile
Re: Pedal for Safety Bicycle "wanted"
« Reply #2 on: August 01, 2018, 09:42:29 PM »
Just to clarify, this pedal does not thread into the crank arm, and does not have flat cut on the boss that engages the crank arm mounting holes.

The crank arm holes are circular cut at .562 inches dia.

The circular boss length prior to where the threading begins is approx 3/8" long (thickness of crank is 3/8").

The threaded portion beyond the boss/crank arm is 1/2 x 20 tpi.

Thanks again, Kurt

 

55inchwheel

  • Jr. Member
  • **
  • Posts: 76
    • View Profile
Re: Pedal for Safety Bicycle "wanted"
« Reply #3 on: August 02, 2018, 11:43:33 AM »
could you post a photo of the crank? (showing the pedal hole)

Kurt S.

  • Newbie
  • *
  • Posts: 24
    • View Profile
Re: Pedal for Safety Bicycle "wanted"
« Reply #4 on: August 02, 2018, 01:44:55 PM »
Here are a couple of photos of the crank.